How To Repair A Soft Bricked Samsung Phone

Repair A Soft Bricked Samsung Phone:

Hey Their,

You may know about soft brick, if you don’t then soft brick is a usually when the android in stuck in boot loop. And as the name implies, is caused by a software error, usually the lack of a system to boot from or some other minor software bug that glitching boot. Some time this will help unintentionally when you load some third party Application to your android phone,these application might corrupt your operating system causing a soft brick. On othe time when some trying to root a android phone something might wrong might happen like phone battery goes down while rooting or phone get switched off due to any other reason, this will let your phone a state where it stuck in booting.

If you are also facing the problem of soft brick in your android phone from what ever developer it is you can repair your phone easily, but different android phones have different solution. In this article we are going to discuss how to repair a soft bricked Samsung phone.

What do we need to proceed 

  • A bricked Samsung phone
  • Laptop or computer
  • Odin
  • Mobile device driver
  • Stock firmware of your Device or you can also choose a custom one.
Odin

Odin is the tool developed by Samsung for its android phones. It is required if you want to root your Samsung android device, or want to install custom ROM into your phone. You can download Odin directly by searching on Google or click here to redirect to official site for Odin.

How to download Stock Firmware

You can download your stock firmware from here. 

Just enter the model number of your device select your region then you are good to go. You might be asked to login to download, but don’t worry it is not going to take to much time. We recommend you to download stock firmware in first place has the size of the firmware is large and it depend on your Internet service provider how much time it take.

How to repair

  • First of all install your device driver on your laptop or computer you will find driver from their official website. Or search directly on Google.
  • Now connect your phone to your laptop or computer using original usb cable
  • Open the download mode in your phone by pressing

Volume down(↓) + Power Button + Home

Now press Volume up to continue

  • Now download the Odin and open it

  • From here you have to click on the PDA

In some versions of Odin you will not find PDA instead their will be AP, Dont worry guys both function are same. Now when you click on the PDA or AP, new screen will appear asking to select the Rom you have to flash in the phone.

  • Select the previously download stock/custom Rom
  • And click on start

You will see it starts some kind of processing, when it finish you will see a green color pass written on top box, then you can unplug your device. Remember only when it is green means the flashing was successful, but if you see red box then it means their is some problem with flashing then you have to repeat all this process again.

  • After unplugging your device power it on.

your phone might take a long time in booting first time, but don’t worry it is normal. In the first boot the android install all the application from the Rom you have installed.

Thanks, hope you like this article, if you have any other question about flashing just comment down below

Leave a Reply

Your email address will not be published. Required fields are marked *